Cozy Fleece Skater Disco "Satin" Jacket

by cdstudioNH in Craft > Fashion

342 Views, 4 Favorites, 0 Comments

Cozy Fleece Skater Disco "Satin" Jacket

collagescreenshot.jpg
20191221_154812.jpg
20191221_154914.jpg
20200103_173449.jpg

Remember the Super-cool satin jackets from the Seventies?

All the cool people wore them.

Now you can make your own updated version and be cool again.

Supplies

Cozy fleece, color of your choice, about 2 yards.

Contrasting color stretch fabric, about 1/2 yard.

16-18" jacket zipper

Serger and regular sewing machine, thread, scissors

A hoodie, vest, or both for pattern-making.

Pattern Pieces

20200103_173159.jpg
20191221_160404.jpg
20191221_160851.jpg
20191221_161816.jpg
20191221_161907.jpg
20191221_162139.jpg
20191221_162914.jpg
20191221_163737.jpg
20191221_163927.jpg

1. Front pieces. Turn hoodie inside out. (add photo)

2. Fold fleece over to create front edge. Using one side of front of zippered hoodie, chalk along outside, adding 1/2" seam allowance. Cut out. Place over another section of folded fleece and cut another.

3. Flip hoodie to back, and create back piece. Fold over for symmetry, make corrections and cut another.

4. Pull sleeve out of hoodie to create sleeve pattern. Fold fleece over at outer part of sleeve.

5. Pull sleeve back inside to create armscye.

6. Finished sleeves.

7. Cut out pockets. Four pieces in total.

8. Serge front and back seams together at shoulder, then pin top of sleeve to that edge, easing to fit.

9. Serge sleeve cap to armscye

Side Pockets

20191221_163352.jpg
20191221_164934.jpg
20191221_165355.jpg
20191221_165531.jpg
20191221_165658.jpg
20191221_165839.jpg
20191221_165858.jpg
20191221_170150.jpg

1. Serge, right sides together

2. Place on one side of jacket front to define where not to sew side seam.

3. sew side seams, avoiding pocket hole.

4. Fit pocket through hole

5. Pin in place

6. Serge through all layers according to pic

7. Turn jacket ride-side out

8. Edge-stitch through lining to keep pocket facing inwards.

Wrist Cuffs and Waistband

20191221_171305.jpg
20191221_171418.jpg
20191221_171506.jpg
20191221_171704.jpg
20191221_171852.jpg
20191221_174132.jpg
20191221_175033.jpg

1. cut out 2 rectangles for wrist cuffs, 9.5" x 6.5"

2. Fold over, right sides together, sew seam

3. Fold in half, right sides showing, edges even.

4. With sleeves inside out, pin cuff inside and sew seam.

5. Finished cuff

6. Waistband cut from contrast and jacket fabric, 6.6" high, length should be waistband of jacket bottom minus a few inches to give an elasticized effect.

7. Finished waistband

Zipper

20191222_183817.jpg
20191222_184108.jpg
20191222_184921.jpg
20191222_185421.jpg
20191222_191202.jpg

1. Zipper install

2. Pin one side of zipper to front as shown.

3. Sew close to teeth.

4. Flip over and topstitch

5. Finished zipper

Collar

20191222_192707.jpg
20191222_193621.jpg
20191222_194042.jpg
20191222_194451.jpg
20191222_195025.jpg
20191222_195224.jpg

1. Fold over contrasting fabric and cut curve relative to jacket neck, as shown.

2. Pin, easing fit

3. Collar stitched.

4. Turn under and topstitch through all layers.

5. Attach pocket to zipper with fleece scrap

6. Finished jacket!

Pretty easy if you can sew... hurry up before this goes out of style... again.

; )

~ Cynthia

Grab Your Platform Shoes or Rollerskates ...

20200102_201101.jpg

and hit the town!

: D