Cook Book Stand

A cookbook stand to hold cook books while cooking

Saw, measuring tape, wood glue, clamps, sandpaper, wood.

Cut wood to length

11x12.5(back)

2 11x2.25(bottom/ledge)

2 9x12 right triangle(support, can be changed for preferred angle)

Sand all pieces to preferred smoothness.

Glue pieces together. (I used two pieces for the back because I had smaller wood)

use clamps to hold pieces in place while glue dries.

Triangle supports go on the back.

Seal with clear coat or stain to protect from cooking messes.

Use for cooking.