Comic Book Shoes

Here is a step by step guide on how to recycle some old shoes and comic books into something fantastic.

I have seen many variants of this project on the web, but thought I would share with you how I made mine.

I recently moved back to North America from Scotland, and as a parting gift to a good friend (who loves Iron Man and shoes) I made her these.

I hope you enjoy.

Not much is needed for this project.

You'll need the following:

A pair of old shoes (I used ones made from patent leather) but you'll want to make sure they have a smooth surface for a good glue adhesion .

Some old comics or other pictures/prints you want to use (I used the older style of comics as the paper was easier to work with)

Scissors

Craft knife

Mod Podge Glue (I used the outdoor type so that the shoes would be sealed and be able to used outdoors)

Optional:

Steel wool and tape

You'll need to cut your comic(s) and separate them into two piles

One pile will have randomly cut sections with lots of color and vibrant images. These will be the base for your shoes.

The second pile will have more detailed cutouts that will be used to add at the end to make the shoes "pop"

Start gluing the pieces around the shoes with the Mod Podge. You can tape around the edges/heel if you want a clean edge, however I found if you cut the pieces to fit, you do not need the tape.

Now add the accent pieces around the shoe (the sides and toe are great places for this) and trim any edges with your craft knife/scissors.

Add a couple coats of Mod Podge when finished (allow about 2 hours between coats for drying)

And that's it.

Now let the recipient enjoy all your hard work.

This was my first attempt at a project like this, and I found it very easy and rewarding and the final product was fantastic.

I hope you have enjoyed this Instructable and please comment and share.

Cheers