Christmas Tree on Tinkercad CodeBlocks

by Max 24 in Workshop > 3D Printing

1494 Views, 4 Favorites, 0 Comments

Christmas Tree on Tinkercad CodeBlocks

T-1.png

This is a simple tree on Tinkercad Code that will take about 5 minutes. Here are 4 easy steps to build it. Follow the instructions or look at the pictures to guide you through the step by step tutorial.

Top of Tree

T-2.png

Add a roof and then drag a rotate block under it. It should rotate from the x axis and rotate -90 degrees. Then have it move Z: 2.5.

Middle of Tree

T-3.png

Add a "add copy of Object"place"top of tree"in it.Then make the middle of the tree and scale it to be 1.5x1.5x1. Then have it move y:-8.

Bottom of Tree

T-4.png

Add a "add copy of Object"place"object 1" in it.Then make the bottom of the tree green and scale it to be 1.5x1.5x1. Then have it move y:-10.

Stump of Tree

T-5.png

Make the stump of the tree brown and size it to be 10x10x5. Then have it move y:-34.25 and z:2.5. Thank you for your time and please consider giving me a heart or leaving a comment.