Christmas Card Holder

In this Instructable, I make my Mom a Christmas Card holder using old Pallet boards. I have also included a video to show step by step.

You will need 2 old pallet boards, I used some that was 52" long and 5 1/2" wide. You can also used some Dog-Ear Fence Picket boards. Or any other old boards.

Some Nails

3/4" Long screws

Binder clips, bought at the Dollar tree

Drill or screwdriver

Tape Measure

Pencil or Pen

Nail the 2 boards using some shorter pieces of wood. Leave a space in between the boards, as shown in the pictures.

Measure the center of one of the boards, mark and measure down about a 1/2" to 3/4". This is where you are going to attach one of the binder clips with a screw. Either using a drill or screw driver. Then attach one of the longest Christmas cards, then measure from the bottom of it, about 1/4" or 3/8". Then attach another binder clip, just keep doing this. It should look like the last picture.

Once finished, hang your Christmas cards on it. My Mom loved it.

This is a easy project, that anyone can make with a few tools and supplies.