Category: IPhone Case With a Built in Card Case a Wallet and Phone Case in One

by evamoukas in Workshop > 3D Printing

66 Views, 1 Favorites, 0 Comments

Category: IPhone Case With a Built in Card Case a Wallet and Phone Case in One

Screenshot 2024-03-14 at 4.39.35 PM.jpeg

Conjunction Project: An iPhone case with an attached cardcase

Supplies

Fusion 360, laptop, mouse 

Create Sketch

FullSizeRender.jpeg
Screenshot 2024-03-22 at 8.10.20 PM.png
  • The First Thing Your Going To Do Is sketch our your product in order to have a clear idea on what you want to design.
  • You then are going to go on fusion 360 and your going to Click On The Button ‘Create Sketch’ 

Create Rectangle

Screenshot 2024-03-22 at 8.11.02 PM.png


  • Then You Select CREATE Then Rectangle Then Center Rectangle
  • In the center of your screen your going to create a rectangle.
  • In order to create a rectangular shape for the base of your phone case and make the height 150mm and the width 71mm

Finish Sketch

Screenshot 2024-03-22 at 8.11.39 PM.png
  • After you've created you rectangle you then click on the button finish sketch 



Case Formation

Screenshot 2024-03-22 at 8.27.53 PM.png


  • After that, you curve the size, add depth and make the holes in the phone case for the camera, charger and buttons.
  • In order to curve the side, your going to use the fillet tool do so.
  • To add holes for the camera and charger, your going to add another shape and then extrude it.

Add the Card Case

Screenshot 2024-03-14 at 4.39.35 PM.jpeg

Once you have your iPhone case, you then create another rectangle on the back of your phone case about 30 mm tall and 2 mm in depth. 


Screenshot 2024-03-22 at 8.12.35 PM.png

Screenshot 2024-03-14 at 4.39.17 PM.jpeg

Screenshot 2024-03-14 at 4.39.22 PM.jpeg

Screenshot 2024-03-14 at 4.39.27 PM.jpeg

Screenshot 2024-03-14 at 4.39.35 PM.jpeg