Cardboard Cat Bedroom

Today I am going to go over how to make a cardboard cat house whose design I got from the You tuber Cat Lesson with some minor altercations.

. 1 medium sized box

. box cutter

. hot glue gun or a bottle of glue( Both work fine)

.Take the box and flip It to it's bottom

.cut off the front the and back flaps with a box cuter

. Then take one of the cut off flaps and cut it in half with a pair of scissors

. Take the remaining bottom flaps hold them together

. Glue them together

. flip up the the front flaps and bend the side flaps until they make the shape of a roof

. Use the two or more of the cut in half back flaps and glue them in the middle to hold them together

. Using a pencil draw the shape that you want the door to be on the front of the box

. Do the same on both sides for the windows

.Using a boxcutter to cut out the shape

.Cut out the edge of the front and back top flaps to the point their tops fit under the roof

.Glue them in place

So that is a how you make a cardboard house into a cat house. If you have any suggestions on how to work with cardboard that would be nice and I hope you all have a nice day.