Bubble Wand

I made a bubble wand to test out 3D printing and seeing if I could succeed.

You will need Tinkercad (https://www.tinkercad.com/dashboard) and a 3D printer.

First I created a circle. The dimensions are 10 millimeter high, 54 millimeters long, and 64 millimeter wide. This will be the main circle that will be the head of Mickey Mouse. After I created the first head I created 2 other circles. The circles will be the ears. The dimensions of the ears are 10 millimeter high, 32 millimeters long, and 38 millimeters wide. I made them smaller than the head and connected it on the right and left end of the circle.

Next I added the holes for the head and ears. The hole for the head dimensions are 42 millimeters wide, 36 millimeters long, and 10 millimeter high. I then centered it by right clicking and selecting both objects. For the ears the dimensions of the hole is 15 millimeters long, 18 millimeters wide, and 10 millimeter high. I then centered both just like the head.

Then I created a rectangle out of a square from tinkercad. The dimensions are 6 millimeters wide 14 millimeters long and 10 millimeter high. I copy and pasted 30 of these and when I finished the rest of the wand I placed them around the circle.

Lastly I created the handle to hold the head and ears. The dimensions are 64 millimeters long, 16 millimeters wide, and 10 millimeters tall. I then centered it to the head.

Lastly I made sure I had all the pieces centered. Once they were all perfect I grouped them all together by clicking the top right button. Which leaded to my end result, a bubble wand.