Bike Badge Belt Buckle

by radiograf in Workshop > Motorcycles

2601 Views, 15 Favorites, 0 Comments

Bike Badge Belt Buckle

DSCF2287.JPG

If you have a motorcycle from a non-mainstream manufacturer, it can be difficult to get promotional wear. With this Instructable I intend to help redress this in some small way, by using a tank badge to create a belt buckle.

This one buy the way states IMZ in cyrillic , the manufacturer of Ural motorcycles in the old Soviet union.

Parts

DSCF2272a.jpg

1x Bike tank badge (metal is best)

1x P clip

1x D ring

1x m4-10mm brass screw

1x m4-15mm brass screw

2x m4 brass washers

1x m4 brass nut

1x m4 brass dome nut

Belt Attachment Assembly

DSCF2274a.jpg

Pass the D ring through the P clip.

Buckle Assembley

DSCF2279a.jpg
DSCF2281a.jpg

Place the 10mm screw through the hole on the left side off the badge, add the p clip washer and dome nut. Rotate the p ring and tighten dome nut.

Belt Tang Assembly

DSCF2283a.jpg
DSCF2285a.jpg

Pass the 15mm screw through the remaining hole, add washer and nut, and tighten.

Finished Buckle

DSCF2287.JPG

Just attach to your belt, and wear with pride!