Awesome Fireworks Fired From RC Airplane

If you would like to remotely ignite fireworks from a radio controlled airplane, there's a lot you need to know. Not to mention that you will have to learn how to fly these things. Let's make the assumption that you are an experienced pilot, with a suitable sized RC airplane for this specific project.

• Large sized RC airplane
• Khantal wire http://www.ebay.com/bhp/kanthal-wire
• Relays http://www.ebay.com/itm/272079662154?_trksid=p2060...
• Switch http://www.hobbyking.com/hobbyking/store/__12615__...
• Fireworks
• 22AWG cable

Khantal coil - take a piece of khantal wire and wind it up on a 1.5mm drillbit, this depends on the diameter of the fuse. Solder the necessary wires and connections as shown in the pictures. Khantal wire is a non-solderable material, so you will have to take a piece of copper wire and wrap around the wire going from the khantal coil.