Automatic Fidget Spinner

All required supplies

• Six 5v batteries
• Two pieces of construction paper
• Eight inches of wire tape
• Small motor
• Four toothpicks
• Switch or Button
• Paper or cardboard platform
• Tape
• Hot glue gun

When making the fidget spinner you can do it many different ways. The fidget spinner has no certain design so you can make any type or kind you would like. So this step is all up to you on how you would like to do it.

• First, you're going to want to put toothpicks on the outside of the motor and tape them.
• Second, you're going to holt glue them the platform securely.

You're going to tape the black wire onto the right side long piece of wire tape.

Place the switch at the bottom of platform and tape both ends to each side of the wire tape securely.

You are going to want to tape the bottom of the Fidget Spinner to the top of the motor. (most motors come with wheel for top of the motor)

Tape all 6 5v batteries together.

Put the battery on top of the left side of the wiretap and the wire to the motor top and hold the button for joy!