Adjustable Book Holder Controlled by Thumb

by Hemant Ghorpade in Workshop > 3D Printing

128 Views, 0 Favorites, 0 Comments

Adjustable Book Holder Controlled by Thumb

Red Book Holder Adjustable.jpg
Red Book Holder Adjustable.jpg
Book Holder opertaed by Thumb.jpg

Its for book lovers. Who are always immersed in reading something. They do not loose any opportunity to read somethings. Whenever they find time in between meetings, during waiting at reception or travelling they do not miss opportunity to read.

The product which is designed in this instructable is for book readers who are fond of reading during travel. When book pages are getting turned due to air, readers need something to hold. How to do that? this is the the starting point of this instructable. The adjustable book holder controlled by thumb will be helping to hold the pages & avoid to getting turned due to air. As per the requirement of user one can increase or decrease size of book holder by loosening screw or tightening screw

Supplies

  1. www.tinkercad.com login
  2. 3D Printer
  3. 3D printer filament
  4. Screws/nails
  5. Book or Magazine

Making Ring of OD29 & ID 25mm

2.png
3.png
4.png
5.png
6.png
7.png
  1. Drag a cylinder on Workplane from Basic Shapes.
  2. Change cylinder size to 29x29x5.
  3. Drag Hollow Cylinder on workplane.
  4. Change Size to 25x25x6
  5. Drag hollow cylinder into solid & allign.
  6. Group it.


Cutting Ring to Two Semicircles

8.png
9.png
10.png
11.png
12.png
  1. Drag a hollow box. convert it into 32x20x0.1mm
  2. Drag a rectangle on a ring & align it.
  3. Increase width of a hollow rectangle to 16mm.
  4. Group it.
  5. Copy & paste.


Making Provision for Screw/nail to Fit

13.png
14.png
15.png
16.png
17.png
18.png
19.png
  1. Turn right hand semicircle by 180.
  2. It got converted to 180 degree.
  3. Create two rods of 39x3x5 mm
  4. Create solid box of 5x5x3mm
  5. Create Hole 3mm at the canter
  6. Make 3 more copies of the holed box
  7. Make boxes of 3x2x5 mm

Towards Final Product

20.png
21.png
22.png
  1. Attach boxes of 3x2x5 mm to semicircle piece
  2. Keep holed boxes as shown on two pieces & group it.
  3. Drawing of Book holder controlled by thumb is ready.

Product Drawing Sliced & Ready for Print

23.png

Book Holder in Use.

Book Holder opertaed by Thumb.jpg
Book Holder 2.jpg
Book Holder 1.jpg
  1. Book Holder Operated By Thumb Is 3D Printed.
  2. Book holder is in use.
  3. Book holder is in use.


Basic Model of Book Holder Without Any Adjustment

Book Holder Basic.jpg

One More Adjustable Book Holder With Red Filament

Red Book Holder Adjustable.jpg