AMAZING! Table and Chair Set for Children Cardboard Tubes and Plywood!
by MORENA DIY in Craft > Reuse
551 Views, 8 Favorites, 0 Comments
AMAZING! Table and Chair Set for Children Cardboard Tubes and Plywood!
Hi guys!
Today I´m glad to share these easy, useful, table and chair set for children with cardboard tubes and plywood.
Supplies
Tools I used, but can be substituted with others:
- hot glue gun
- Drill
- Jig-saw
- Dremel
- Cordless screwdriver
Materials:
- Plywood sheets
- Cardboard tubes
- Glue gun sticks
- Screws
- Steel washers
- Emulsion paint
- Paint brush
- Synthetic winterizer
- Fabric (I used a bath towel)
Table Legs
We will cut with 4 cardboard tube with the length of 46 cm!
Then we will paint them with emulsion paint, first with white color then with pink.
After each layer of paint we will let them dry!
Upper of the Table
We cut a piece of Plywood sheets with size of 70cm X 60cm.
We round the corners (6cm) and then sand the entire edge with sandpaper!
We will paint 3 layers with emulsion paint, after each layer of paint we will let them dry!
Table Is Ready!
Legs to Chair
We will cut with 5 cardboard tube with the length of 50cm and 2 cardboard tube with the length of 28cm!
Then we will paint them with emulsion paint, first with white color then with pink.
After each layer of paint we will let them dry!
We will make holes in them (the bottom of the cardboard tube - 2cm, the top of the cardboard tube - 4cm) and then we will join them of screws and steel washers.
The Upper Part of the Chair!
Final Assembly!
Voila and It's Ready!!!
I hope they are inspiring!!!
Don't forget to check out the video for any more details you need! ❤️🌸👍🏻