A Simple Electronic Game

You are learning how to make a small very funny electronic game. You can play with your friends and test your reflex.

Thanks UTSOURCE.net to offer electronic components for my projects

You can download the gerber file on this site :

The size of the PCB are: length 42mm and width 14mm.

You can make your pcb on PCBWAY. I ordered pcb on this site and I found it very reliable.

Here is the components you will need:

- 2 resistors (1k ohm)

- 3 resistors (cms)(1k ohm)

- 1 red led (cms) - 2 green leds (cms)

- 2 push button

- 4 capacitors (cms)(not necessary)

- 1 attiny 44/84 SOIC-14

After finding all the components you can weld them on the pcb. To program the microcontroller you can visit the site High-Low Tech. You can use the Arduino program for ATtiny 44/84.

1) Connect the PCB has a supply of 5v.

2)Each player places a finger on the push button ( don't press the button).

3) Wait a few seconds and the red led lights.

4) The first player who presses his button win, and a green LED lights.

5) Wait a few seconds and the game will start again.