Batman Wall Light!

I needed to make a lampshade for a light in my room that was too bright. Being a huge fan of superheroes and especially of Batman I decided it would be the most appropriate, effective and cool lampshade. In the end I am pretty satisfied with how it came up.

Here are the parts and tools that are required for this project :
MATERIALS:

• Carboard
• Spray paint (black would be the best)
• Led lights or led strips (the stuff you would hang on Christmas trees)
• The template of the batman logo (found in next step)
• paper

TOOLS:

• X-actor knife
• Marker
• Glue

I started by looking for the Batman's logo on the net. Once I was satisfied with one of the models I converted it to the dimensions that I required (maintaining the proportions) and drew it on a simple modelling software. (templates attached above). You will have to print the logo on 6×A4 sized sheets of paper. Then cut out the templates and paste them together. Then trace it onto the cardboard.

Then I moved on to cutting out the traced shape with my x-acto knife, making sure to follow the lines. Once you have cut out the logo you should have a perfectly symmetric batman logo. It's time to add the finishing touches let's move on to the painting...

Spray paint or paint the logo with black paint making sure to get an even layer of paint. apply at least 2 layers of paint to really make it perfect !

Now take your Christmas lights and using some regular quick dry glue attach the bulbs to the edge of the cardboard. (remember to attach them at the back or you will lose the whole effect of this project.) I used some regular cheap clothes pins to hold the lights in place while I stuck the other ones. This makes the job go much faster.

Now you have a cool source of light that you can hang on your wall or place on your desk !!

Hope you have enjoyed this project!!