4 Ways to Lace Shoes

by Keelanclough in Craft > Fashion

481 Views, 4 Favorites, 0 Comments

4 Ways to Lace Shoes

IMG_2818 copy.jpg

Here are four different ways to lace your shoes!

First

DSC_1262.jpg

First, I'll explain how to do this one.

#1

DSC_1253.jpg

Put the laces through the bottom like this, evenly.

#2

DSC_1254.jpg

Tuck the middle behind the tongue.

#3

DSC_1255.jpg

Skip one of the holes, and pull the left lace through, as shown.

#4

DSC_1256.jpg

Pull it through, then under into the empty hole under it.

#5

DSC_1257.jpg

Do the same with the right side.

#6

DSC_1260.jpg

The repeat that same process above it.

#7

DSC_1261.jpg

Then pull the laces through the top, and tie them under the tongue. Or tie them as you normally would.

Finished!

DSC_1264.jpg

Thats it for this one. :)

Second One

DSC_1275.jpg

I think this one looks the coolest.

#1

DSC_1265.jpg

Pull both laces through the left side, evenly.

#2

DSC_1267.jpg

then pull them over the top, and go through the right side, as shown.

#3

DSC_1269.jpg

Skipping a hole, pull one of the right strings through.

#4

DSC_1270.jpg

Do them both.

#5

DSC_1271.jpg

Then pull both strings through the empty holes.

#6

DSC_1273.jpg

And weave them one on top of the other like this. Its quite simple. Then shove the laces under the tongue, or tie them as you normally would.

Third One

DSC_1288.jpg

This one was kinda hard for some reason, but hopefully I can explain it well enough!

#1

DSC_1276.jpg

Pull both laces through one side like this.

#2

DSC_1277.jpg

Take the bottom lace, and pull it through the top one on the opposite side.

#3

DSC_1278.jpg

Then take the other lace and go through the other side directly across .

#4

DSC_1279.jpg
DSC_1280.jpg

Then go through the other side and come back.

#5

DSC_1281.jpg

Continue going up, as shown. then tie them off. Thats it!

Fourth One

DSC_1290.jpg

This is actually the easiest one.

#1

DSC_1282.jpg

Pull the laces through evenly like this.

#2

DSC_1283.jpg

Then cross them, skip a hole, and go through. (just lookit the pictures.)

#3

DSC_1284.jpg

then go back through the oposite hole so that the laces overlap each other.

#3 Continued

DSC_1285.jpg

Like this.

#4

DSC_1286.jpg
DSC_1287.jpg

Then just repeat the same thing over and over. Its very simple. I'm sure you'll figure it out really quickly.

Thats All!

IMG_2818.jpg

Thats all of them, I hope you can figure them out!! :)